Model 1250 – Mil-Spec Wide Format Color Inkjet Printer
Product Highlights
- “Long” (30.1”) and “short” (23.6”) configurations to support space challenged applications
- Wide format printing up to 11”x17”
- 4800 x 1200 dpi optimized photo-quality color printing
- Up to 33ppm black / 29ppm color
- Ethernet and USB interfaces standard
- Very low power consumption
- Qualified by similarity to meet:
- MIL-STD-810G Shock
- MIL-STD-810G Vibration
- MIL-STD-461F EMC/EMI
- MIL-STD-1686A ESD
- Print engine is internally shock/vibration isolated
- Tabletop or shock tray mounting
- Standard 90-264 VAC or 10-36 VDC power input
Product Overview:
Model 1250 is NOVA’s wide format, military-grade color inkjet printer capable of printing up to 11” x 17”sheets. Following the design concepts of the tested and flight-qualified Model 1150 Printer selected by Boeing for deployment aboard the P-8I Multi-mission Aircraft, the 1250 is designed to meet the same MIL standards for EMI/EMC, power transients, shock, vibration, crash acceleration, temperature and humidity to include sand and dust.
The 23.6 Short printer is specifically designed for space challenged applications and is the compact version of the Model 1250 – 30”Long.
From a performance perspective, Model 1250 is rated at 33 pages per minute in black mode, up to 29 pages-per-minute in color mode, and uses standard HP ink cartridges. Power consumption is approximately 25 Watts when printing and a mere 2 Watts in standby mode. The heater option adds about 100W max while active.
Standard I/O interfaces include USB 2.0 and Ethernet (10/100 Base-T). through the Amphenol RJFIELD and USBFIELD connector series.
Continued availability of the HP engine and parts up to five (5) years after their announced discontinuation is assured by NOVA’s EOL program.
*In the short configuration, to print on 11×17 paper the front door must remain open and the paper tray extended past the front panel opening. While printing on 11×17 paper the printer will not meet the operational shock/vibration specs as well as EMI/EMC and sand/dust.
-
Temperature, operating 0°C to +50°C per MIL-STD-810F, or -40°C to +50°C w/ Heater (Optional) Temperature, non-operating -40°C to +85°C per MIL-STD-810F Humidity 6% to 95% non-condensing per RTCA/DO-160F, Section 6.3.1, Category A Low pressure MIL-STD-810F, Method 500.4, Procedures I and II, (atmospheric pressure corresponding with -1,500 ft.) Rapid decompression MIL-STD-810F, Method 500.4, Procedure III from 8,000 ft. up to 41,000 ft. in 15 sec. Altitude, operating -1,500 to 15,000ft Altitude, non-operating -1,500 to 45,000ft. Vibration, operating MIL-STD-810F, Method 514.5, Procedure I, Cat 8 Wheeled Vehicle, US Army CHS-3 profile Vibration, non-operating MIL-STD-810G, Method 514.6, Proc I, secured cargo, basic transportation Shock, operating MIL-STD-810F, Method 516.5 Procedure I (functional shock for wheeled vehicles) Shock, non-operating (bench handling) MIL-STD-810F, Method 516.5 Procedure VI transportation MIL-STD-810F, Method 516.5, Procedure IV, Transit Drop Crash acceleration MIL-STD-810F, Method 516.5 Procedure V (16g limit) Inclination 0° to 30° in any axis EMI/EMC MIL-STD-461E, Method CE101, CE102, CS101, CS102, CS114, CS115, CS116, RE101, RE102, RS101, RS103 ESD DO-160E Section 25 (20 contact points) Grounding and bonding MIL-STD-464 & BAC5117-1 Sand/Dust MIL-STD-810F, Method 510.4, Proc. I, II & III Rain Designed to meet MIL-STD-810F, highly resilient - Note: Non-operating or storage conditions require ink and paper to be removed from print engine and properly stored until next use
- Note: Non-operating or storage conditions require ink and paper to be removed from print engine and properly stored until next use
| Dimensions | “Long” 10.46” H x 24.04” W x 30.1” D “Short” 10.46” H x 24.04” W x 23.6” D |
| Weight | “Long” 52 lbs. “Short” 48 lbs. |
| Mounting | Tabletop or Shock Tray |
| Input Power (standard) | 90-264 VAC @ 47-63 Hz (aircraft compliant) |
| Input Power (optional) | 100-127 VAC @ 47-440 Hz 10-36 VDC |
| Power Consumption | 30W Printing / 2W Standby 152W Max with heater option while printing |
| Power Transients | MIL-STD-704E for aircraft MIL-STD-1275D for vehicles |
| Data Interface | Power Input (J1)MS3472W12-3PY USB 2.0 (J2): USBFTV2PE1G w/ dust cap Ethernet (J3): RJFTV21G w/ dust cap |
| Print Resolution | Color: 4800 x 1200 dpiBlack: 1200 x 600 dpi |
| Print Speed | Color: 29 ppmBlack: 36 ppm |
| Memory | 120 MB (non-expandable) |
| Languages & Fonts | HP PCL 3 GUI, HP PCL 3 Enhanced |
| Paper Sizes | Letter, legal, executive, tabloid, envelopesUp to A3, A4, A5, A6, B5 |
| Paper Input | 250-sheet input tray |
| Operating System | Windows 8, 7, Vista, XP, Max OS X, Linux |